Solar Driveway Alarm Keeping Your Home Safe
- 1500 feet wireless range
- Over 30 years’ experience in solar driveway alarm system
- Durability & Weather Resistance Test Pass (thick forest, hail storms, heavy rain, scorching heat and snow in harsh environment）
The Solar Motion Sensor with Wireless Motion Alert is a convenient and affordable security system
- Weatherproof outdoor solar sensor with adjustable sensitivity control.
- Alerts with light and sound when vehicles or pedestrians approach within a 30 feet radius.
- Expandable up to 4 solar sensors and unlimited receivers.
- Super simple to set up. Takes only a few minutes to set up. Easy do-it-yourself installation.
- The receiver can be plugged in using the included AC adapter or can run on (4) AA batteries.
-
PIR technology (minimizes false alarms）
Solar-powered Sensor:
The sensor can be powered by a built-in rechargeable lithium-ion battery besides the solar panel.
It will work for up to 6 months after charging with the DC5V adapter.
Super Long Range:
Customized Design:
Brown color sensor is blended in the trees or fence around your property.
Customized Function:
The sensor red light flashes only when you choose zone 1 or 2. If you don’t want people to see it, choose zone 3 or 4.
Expandable:
Add up to 4 sensors to detect motion in different areas around your property; add extra receivers to be alerted throughout your home.
Easy Setup and Use:
Install in minutes. Supported by PIR(passive infrared sensor). Alerts with optional sound and light.
Both the receiver and sensor have off mode. No Internet and phone connection needed. Works at night.
____
Weather-proof:
Industrial-grade PVC housing, rubberized weather/water-resistant seal for the sensor.
Additional Assurance:
Two-year warranty. 24/7 customer service and technical support.
Troubleshootings:
Getting false alarm—Please try to set your sensor above the ground around 4.5-6ft high and 0-30 ft from your driveway, try to set your sensor in lower sensitivity.
Sensor going off—Please try to set your sensor above the ground around 4.5-6ft high and try to change the sensitivity, make sure there are no trees and moving branches in front of your sensor, please do not let your sensor’s eye face to the sunlight directly. and one more important thing is that do not drop down your sensor on the ground.
Sensor stopped working––Please try to charge your sensor and see if the blue light will keep on or keep flashing, we need to confirm the battery is defective or not, if it keeps flashing Please get back to our service support through email in the user manual, we could replace the new one for you.
Sometimes work sometimes not––Please try to set your sensor above the ground around 4.5-6ft high and Please angle downward the direction of the sensor (rather than horizontal), that way the detector is looking at a vehicle for a longer period of time.
Other questions—Please get back to our service support through email in the user manual, we will do our best to make it right for you.
Overview
Dimensions: 5.6 x 5.2 x 5.2 inches for packages.
Includes: up to 4 sensors, 1 receiver, 1 AC adapter, mounting hardware.
Frequency: The frequency of the transmitter is 433mHz.
Weather Temperature: The sensor operating range is from -4F to 140F.
Sensor Range: Sensor detection up to 30 ft. The sensitivity can be adjusted.
Sensor Type: PIR (passive infrared )
Warranty: Two-year warranty, 24/7 customer service and technical support.
Zones: The receiver has 4 zones which support up to 4 sensors. 4 different tones allows you to distinguish which sensor was triggered and prevent interference from neighbor’s sensor signal. The volume is adjustable.
Lights: Red light flash on the receiver shows the motion detection from the sensor. Blue light of the sensor shows it’s fully charged. The sensor red light flashes only when you choose zone 1 or 2.
Power: The receiver can be plugged in using an included AC adapter or can run on 4 AA batteries (not included). Solar panel and built-in 18650 lithium-ion battery with DC5V adapter for the sensor. Fully charged and low battery alert included.
Installation: Sensor can be mounted to fences, trees, posts, mailbox and walls with included mounting hardware. Receiver can be portable up to 1/2 mile ideally without obstacles. Please make sure there is no metal interference. Set your sensor above the ground around 4.5-6ft high. No straight light or leaves etc to the sensor eye. The sensor angle affects the range.
A Customer’s introduction on more details :
Note: eMacros is a sub-brand of Hosmart.
